Yamaha RX-V663 105 En, AMP, mode, INPUT, Select, Select, HPOWER, English, ADVANCED, OPERATION, Operating Zone, Operating Zone, Turning on Zone, Set Zone 2 to the standby mode

Operate the following operations after activating the Zone 2 operation mode.

Operating Zone 2

Press RINPUT l/ hto select the desired input source while the ZONE2 indicator is flashing in the front panel display.

•Select “TUNER” as the input source to use the TUNER features in Zone 2. For details about the TUNER operations, see “FM/AM tuning” on page 53.

•Select “XM” as the input source to use the XM Satellite Radio features in Zone 2. For details about the XM Satellite Radio operations, see “XM Satellite Radio tuning” on page 57.

•Select “SIRIUS” as the input source to use the SIRIUS Satellite Radio features in Zone 2. For details about the SIRIUS Satellite Radio operations, see “SIRIUS Satellite Radio™ tuning” on page 62.

•Select “V-AUX” as the input source to use iPod features in Zone 2. For details about the iPod operations, see “Using iPod™” on page 68.

•Select “V-AUX” as the input source to use Bluetooth component features in Zone 2. For details about the Bluetooth component operations, see “Using Bluetooth™ components” on page 70.

Set Zone 2 to the standby modePress HZONE 2 ON/OFF to set Zone 2 to the standby mode.

Press LSYSTEM OFF to set the main zone and Zone 2 to the standby mode simultaneously.

Using multi-zone configuration

■Controlling Zone 2 with the remote control

Turning on Zone 2

While pressing and holding 5AMP, pressHPOWER.

While holding

down

AMP

POWER

Operating Zone 2

While pressing and holding 5AMP, press one of the input selector buttons (4) to select the desired input source of Zone 2.

Notes

JMUTE and EVOLUME +/– are available to control Zone2 with same procedure as mentioned above.

Setting Zone 2 to the standby modeWhile pressing and holding 5AMP, press ISTANDBY to set ZONE 2 to the standbymode.

OPERATION	ADVANCED

English