10Press 8kand then 8ENTER to display the setup results in detail.

AUTOSETUP

.RESULT

SP : 3/4/0.1

DIST: 14.0/17.0ft

LVL : -9.0/+6.5dB

>SET CANCEL

[]/[]:Up/Down [ENTER]:Detail

RESULT WIRING

FRONT L;;;;;;;OK

[[]/[[]:Select [ENTER]:Return

11Press 8l/ hrepeatedly to toggle betweenthe setup result displays.Press 8k/ nto toggle between the parameters in a results.

Results of the speaker connection and wiring (WIRING)

Optimizing the speaker setting for your listening room (YPAO)

Notes

•The distances displayed in the “DISTANCE” results may be longer than the actual distance depending on the characteristics of your subwoofer.

•In the “EQ” results, different values may be set for the same frequency to provide finer adjustments.

12Press 8ENTER to return to the top result display.

AUTOSETUP

RESULT

SP : 3/4/0.1

DIST: 14.0/17.0ft

LVL : -9.0/+6.5dB

.>SET CANCEL

[]/[]:Up/Down [ENTER]:Enter

13Make sure the pointer is pointing at “SET” and “CANCEL” and then press 8l/ hto

select “SET” or “CANCEL”.

AUTOSETUP

RESULT

SP : 3/4/0.1

DIST: 14.0/17.0ft

LVL : -9.0/+6.5dB

.>SET CANCEL

[]/[]:Up/Down [ENTER]:Enter

PREPARATION

Results of the speaker distance from the listening position (DISTANCE)

Results of the setting of each speaker size

(SIZE)

Results of the parametric equalizer of each speaker (EQ)

Results of the speaker output level (LEVEL)

y

If you are not satisfied with the results or want to manually adjust each parameter, use “MANUAL SETUP” (see page 80).

Choices: SET, CANCEL•Select “SET” to confirm the “AUTO SETUP” results.•Select “CANCEL” to cancel the “AUTO SETUP” results.14Press 8ENTER to confirm your selection.

The following screen appears. Disconnect the optimizer microphone from this unit. The optimizer microphone is sensitive to heat. Keep it away from direct sunlight and do not place it on top of this unit.

AUTOSETUP

AUTOSETUPComplete Disconnect Microphone

PRESS [ENTER] [MENU]:Exit

English

35 En