Yamaha RX-V663 40 En, Creating your original SCENE templates, MODE, Press, Press, ENTER, RETURN, ■Rename the SCENE templates, •INPUT: The input source component

Selecting the SCENE templates

Creating your original SCENE templates

You can create your original SCENE templates for each SCENE button. You can refer to the preset 18 SCENE templates to create the original SCENE templates.

Select the desired SCENE	Create an original SCENE
template	template
	SCENE:DVDViewing
	INPUT:DVD
	SCENE:DVDViewing
SCENE template library
(Image)
	1
	Assign the SCENE
	template to the
	SCENE button

1Turn on the video monitor connected to this unit.2Press and hold the desired 6SCENE button for 3 seconds.The SCENE template customizing screen appears on the video monitor.

SCENE1

.p
DVD
Viewing








[ [



INPUT:

DVD

MODE:


STRAIGHT

[ENTER]:Rename

[SCENE1]:SET

[RETURN]:EXIT

Note

When the SCENE template you want to customize is not assigned to any of the 6SCENE buttons, press 8l/ h repeatedly to recall the desired SCENE template on the menu screen.

3Press 8k/ nto select the desired parameter of the SCENE template and then 8l/ hto

select the desired value of the selected parameter.You can adjust the following parameters for a SCENE template:•INPUT: The input source component.•MODE: The active sound field programs, “Straight” or “Pure Direct” mode.4Press the 6SCENE button again to confirm the edit.

y

An asterisk mark (*) appears by the name of the original SCENE template.

Notes

•Once the desired SCENE templates are assigned to the corresponding 6SCENE buttons, you need to set the input

source of the SCENE template on the remote control. See page 41 for details.

•You can create a customized SCENE template for each SCENE button, and if you create another customized SCENE template, this unit overwrites the old customized SCENE template with the new one.

•The newly created template is only available for the assigned SCENE button.■Rename the SCENE templatesSelect the name of the SCENE template at step 3of “Creating your original SCENE templates” and then press 8ENTER.

SCENE1

RENAME

DVD
Viewing









-

[
]/[
]:Characterp

[p]/[[]:Position

[ENTER]:SET

[RETURN]:CANCEL

•Press 8k/ nto select the desired character.

•Press 8l/ hto place an “_” (underscore) under the space or the desired character.

•Press 9RETURN to cancel the new name.•Press 8ENTER to confirm the new name.

40 En