DSP A B indicatorsLight up according to the set of front speakers activated (see page 43).SP A: The FRONT A speakers are activated.SP B: The FRONT B speakers are activated.SP A B: The FRONT A and FRONT B speakers are activated.EZONE2 indicatorLights up when Zone 2 is turned on (see page 104).FDSP indicators

The respective indicator lights up when any of the sound field programs are selected (see page 48).

Connections

Using the remote control

The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.

Remote control sensor

CINEMA DSP indicatorLights up when you select a CINEMA DSP sound field program (see page 48).VIRTUAL indicatorLights up when the Virtual CINEMA DSP mode is active (see page 51).SILENT CINEMA indicatorLights up when headphones are connected and a

Approximately 6 m (20 ft)

I1Infrared window

30 30

sound field program is selected (see page 51).GMulti-information display

Shows the name of the current sound field program and other information when adjusting or changing settings.

HSLEEP indicatorLights up while the sleep timer is on (see page 47).IInput channel and speaker indicators

LFE indicator

LFE

Presence speaker indicators

 

L C R

 

SL SB SR

Input channel indicators

 

SBL SBRInput channel indicators•Indicate the channel components of the current digital input signal.

•Light up or flash according to the settings of the speakers when this unit is in the automatic setup procedure (see page 32) or in the “BASIC MENU” in “MANUAL SETUP” (see page 87).

Presence speaker indicators

Light up or flash according to the setting of “EXTRA SP ASSIGN” when this unit is in the automatic setup procedure (see page 32) or in the “BASIC MENU” in “MANUAL SETUP” (see page 85).

y

You can make settings for the presence and surround back speakers automatically by running “AUTO SETUP” (see page 32) or manually by adjusting settings for “SUR.B L/R SP” (see page 86) in “SPEAKER SET”.

Outputs infrared control signals. Aim this window at the component you want to operate.

y

To set the remote control codes for other components, see page 102.

Notes

•Do not spill water or other liquids on the remote control.•Do not drop the remote control.•Do not leave or store the remote control in the following types of conditions:–places of high humidity, such as near a bath–places of high temperature, such as near a heater or stove–places of extremely low temperatures–dusty places

PREPARATION

English

31 En