Before performing the following operations, press 3XM.
■All Channel Search mode1Press BSEARCH MODE (or MSRCH MODE) repeatedly to select “ALL CHSEARCH”.2Press EPRESET/TUNING/CH l/ h(or
8PRESET/CH k/ n) repeatedly to search for a channel within all channels.y
•You can search for a channel quickly by pressing and holding
EPRESET/TUNING/CH l/ h(or 8PRESET/CH k/ n).•To display the XM Radio ID number displayed in the front panel display, select channel “0”.
■Category Search mode1Press BSEARCH MODE (or MSRCH MODE) repeatedly to select “CAT SEARCH”.2Press DCATEGORY (or3Press EPRESET/TUNING/CH l/ h(or
8PRESET/CH k/ n) repeatedly to search for a channel within the selected channel category.
y
You can search for a channel quickly by pressing and holding
EPRESET/TUNING/CH l/ h(or 8PRESET/CH k/ n).
XM Satellite Radio tuning
■Preset Search modePrior to selecting a preset channel in the Preset Search mode, you must preset XM Satellite Radio channels. For details, see “Setting the XM Satellite Radio preset channels” on page 60.
y
The initial factory setting of all preset channels (A1 to E8) is “001 Preview”.
1Press BSEARCH MODE (or MSRCH MODE) repeatedly to select “PRESET
SEARCH”.
2Press DCATEGORY (or
3Press EPRESET/TUNING/CH l/ h(or
8PRESET/CH k/ n) repeatedly to change the preset channel number (1 to 8).y
You can also select the preset channel number directly by pressing the numeric buttons (1 to 8) (G).
■Direct number access mode1Press MSRCH MODE on the remote control repeatedly to select “ALL CH SEARCH” or “CAT SEARCH”.
2Press the numeric buttons (G) to enter the desiredFor example, to enter the number 123, press the numeric buttons (G) as shown below.
1 | 2 | 3 |
|
|
y
•To enter a
•Instead of pressing TENT to tune into the channel immediately, you can wait a few seconds until this unit confirms the entered channel number.
•Pressing a button other than the numeric buttons (G) or TENT cancels the Direct Number Access mode procedure.
OPERATION | BASIC |
|
|
English