■Low-frequency effect level

B)LFE LEVEL

Use this feature to adjust the output level of the LFE (low- frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective when the input signal contains the LFE channel.

Control range: –20 to 0 dBControl step: 1 dB

B)LFE LEVEL

. SPEAKER;;;;;;0dB

HEADPHONE;;;;0dB

[]/[p]: Up/Down

[p]/[[]: Adjust

Speakers SPEAKERAdjusts the speaker LFE level.Headphones HEADPHONEAdjusts the headphone LFE level.

Note

Depending on the settings of “LFE/BASS OUT” (see page 85), some signals may not be output at the SUBWOOFER PRE OUT jack.

Customizing this unit (MANUAL SETUP)

■Dynamic range C)DYNAMIC RANGE

Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when this unit is decoding bitstream signals.

C)DYNAMIC RANGE

SPEAKER;;;;;;;;;MAX

. HEADPHONE;;;;;;;MAX

[]/[p]: Up/Down

[p]/[[]: Select

Speakers SPEAKER

Adjusts the dynamic range compression for the speakers.

Headphones HEADPHONE

Adjusts the dynamic range compression for the headphones.

Choice

Functions

 

 

MIN/AUTO

• MIN: Adjusts the dynamic range to narrow

 

when this unit is decoding bitstream signals

 

(except Dolby TrueHD).

 

• AUTO: Adjusts the dynamic range according

 

to the instruction of the input source signals

 

when this unit is decoding Dolby TrueHD

 

signals.

 

 

STD

Adjusts the dynamic range to medium. When

 

this unit is decoding Dolby TrueHD signals, the

 

dynamic range control is always active

 

regardless of the instruction of the input source

 

signals.

 

 

MAX

Preserves the greatest amount of dynamic range.

 

 

OPERATION

ADVANCED

 

 

English

91 En