XM Satellite Radio tuning

Before performing the following operations, press 3XM.

Setting the XM Satellite Radio preset channels

You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in “Preset Search mode” on page 59.

1Search for a channel you want to set as a preset channel by using one of the XM Satellite Radio search modes.

See “Basic XM Satellite Radio operations” on page 58 for details.

043XMU

Currently selected channel number

2Press FMEMORY (or 9MEMORY).

The MEMORY indicator flashes in the front panel display for approximately 30 seconds.

MEMORY

Flashes

Note

You must proceed to and carry out steps 3 through 4 while the MEMORY indicator is flashing in the front panel display.

3Press EPRESET/TUNING/CH l/ h

(or 8PRESET/CH k/ n) repeatedly to select a preset channel group and number (A1 to E8) while the MEMORY indicator is flashing.

The preset channel number appears in the front panel display.

Flashes

MEMORY

C5 043XMU

Selected preset channel group and number

y

You can select the preset station group (A to E) by pressing

DA/B/C/D/E (or 8A-E/CAT. l/ h) repeatedly.

4Press FMEMORY (or 9MEMORY) to set the selected XM Satellite Radio channel as a preset channel while the MEMORY indicator is flashing.

A colon (:) appears next to the preset channel number for confirmation, and the MEMORY indicator turns off in the front panel display.

C5:043XMU

Colon (:)

Note

Once you set a new preset channel, the one previously stored in the same preset channel group and number is cleared.

60 En