Yamaha RX-V663 18 En, Information on HDMI™, PCM, etc, DSD, DTS, types, media, IN1DVD, formats, 2/5.1ch, Multi-ch, SA-CD,etc, Bitstream, When CPPM, Compatible, 2ch Linear

Connections

Information on HDMI™■HDMI signal compatibilityAudio signals

Audio signal	Audio signal	Compatible
types	formats	media

2ch Linear	2ch, 32-192 kHz,	CD, DVD-Video,
PCM	16/20/24 bit	DVD-Audio, etc.

Multi-ch	8ch, 32-192 kHz,	DVD-Audio, Blu-
Linear PCM	16/20/24 bit	ray Disc, HD DVD,
		etc.

DSD	2/5.1ch,	SA-CD, etc.
	2.8224 MHz, 1 bit

Bitstream	Dolby Digital,	DVD-Video, etc.
	DTS

Bitstream (High	Dolby TrueHD,	Blu-ray Disc,
definition audio)	Dolby Digital Plus,	HD DVD, etc.
	DTS-HD Master
	Audio, DTS-HD High
	Resolution Audio,
	DTS Express

•If the input source component can decode the bitstream audio signals of audio commentaries, you can play back the audio sources with the audio commentaries mixed down by using the following connections:

–multi-channel analog audio input (see page 25)–DIGITAL INPUT OPTICAL (or COAXIAL)

•Refer to the supplied instruction manuals of the input source component, and set the component appropriately.

Video signalsThis unit is compatible with the video signals of the following resolutions:Video signal format–480i/60 Hz–576i/50 Hz–480p/60 Hz–576p/50 Hz–720p/60 Hz, 50 Hz–1080i/60 Hz, 50 Hz–1080p/60 Hz, 50 Hz, 24 HzDefault input assignment of HDMI input jacks

HDMI input jack	Assigned input source

IN1DVDIN2DTV/CBL■HDMI jack and cable plug

HDMI

HDMI cable plug

Notes

•When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output depending on the type of the DVD player.

•This unit is not compatible with HDCP-incompatible HDMI or DVI components.

•To decode audio bitstream signals on this unit, set the input source component appropriately so that the component outputs the bitstream audio signals directly (does not decode the bitstream signals on the component). Refer to the supplied instruction manuals for details.

•This unit is not compatible with the audio commentary features (for example, the special audio contents downloaded via Internet) of Blu-ray Disc or HD DVD. This unit does not play back the audio commentaries of the Blu-ray Disc or HD DVD contents.

•We recommend that you use an HDMI cable shorter than 5 meters (16 feet) with the HDMI logo printed on it.

•Use a conversion cable (HDMI jack ↔ DVI-D jack) to connect this unit to other DVI components.

Notes

•Do not disconnect or connect the cable or turn off the power of the HDMI components connected to the HDMI OUT jack of this unit while data is being transferred. Doing so may disrupt playback or cause noise.

•If you turn off the power of the video monitor connected to the HDMI OUT jack via a DVI connection, this unit may fail to establish the connection to the component.

•The analog video signals input at the composite video, S-video and component video jacks can be digitally up-converted to be output at the HDMI OUT jack. Set “VIDEO CONV.” to “ON” in “MANUAL SETUP” (see page 97) to activate this feature.