Yamaha RX-V663 86 En, NONE, NONE, NONE, LARGE, SMALL, LARGE, SMALL, LARGE, SMALL, LRGx1, LRGx2, SMLx1, SMLx2, Choice, Choice, Choice, Choice, Descriptions, Descriptions

Customizing this unit (MANUAL SETUP)

Measure for the speaker sizeThe woofer section of a speaker is–16 cm (6.5 in) or larger: large–smaller than 16 cm (6.5 in): smallFront speakers FRONT SP

	A)SPEAKER SET
	FRONT SP
	SMALL >LARGE
Choice	Descriptions
LARGE	Select this setting when the front speakers are
	large.
SMALL	Select this setting when the front speakers are
	small.

Note

When “LFE/BASS OUT” is set to “FRONT”, you can select only “LARGE” in “FRONT SP”. If the value of “FRONT SP” is set to other than “LARGE” in advance, this unit change the value to “LARGE” automatically.

Center speaker CENTER SP

A)SPEAKER SET

CENTER SP

NONE >SMALL LARGE

When the center speaker is large:Select “LARGE” (large).When the center speaker is small:Select “SMALL” (small).When you do not use the center speaker:

Select “NONE” (none). The center channel signals are directed to the front left and right speakers.

Choice	Descriptions
LARGE	Select this setting when the center speaker is
	large.
SMALL	Select this setting when the center speaker is
	small.
NONE	Select this setting when you do not use the center
	speaker. The center channel signals are directed
	to the front left and right speakers.

Surround left/right speakers SUR. L/R SP

A)SPEAKER SET

SUR. L/R SP

	NONE >SMALL LARGE
Choice	Descriptions
LARGE	Select this setting when the surround speakers
	are large.
SMALL	Select this setting when the surround speakers
	are small.
NONE	Select this setting when you do not use the
	surround speakers. This unit is set to the Virtual
	CINEMA DSP mode (see page 51), and “SUR.B
	L/R SP” is automatically set to “NONE”.

Surround back left/right speakersSUR.B L/R SP

	A)SPEAKER SET
	SUR.B L/R SP
	SMLx1 >SMLx2 LRGx1
Choice	Descriptions
LRGx1	Select this setting when the single surround back
	speaker is large.
LRGx2	Select this setting when the surround back left
	and right speakers are Large.
SMLx1	Select this setting when the single surround back
	speaker is small.
SMLx2	Select this setting when the surround back left
	and right speakers are small.
NONE	Select this setting when you do not use the
	surround back speakers. The surround back
	channel signals are directed to the surround left
	and right speakers.

Note

If the Dolby TrueHD audio signals are input and “SUR.B L/R SP” is set to “NONE”, the left and right surround back channels are not directed to the surround left and right speakers.

86 En