Printer Setup 17
Unpack and Inspect the Printer
Unpack and Inspect the Printer
When you receive the printer, immediately unpack and inspect it for shipping damage. Save all packing materials.
Inspect the Printer
Inspect the printer for possible damage incurred during shipment:
•Check all exterior surfaces for damage.
•Raise the media door, and inspect the media compartment for damage to components.
Report Shipping Damage
Important • Zebra Technologies is not responsible for any damage incurred during the shipment of the equipment and will not repair this damage under warranty
If you discover shipping damage upon inspection:
•Immediately notify the shipping company and file a damage report.
•Keep all packaging material for shipping company inspection.
•Notify your authorized Zebra reseller.
Store the Printer
If you are not placing the printer into immediate operation, repackage it using the original packing materials. You may store the printer under the following conditions:
•Temperature:
•Relative humidity: 5% to 85%,
Shipping
If you must ship the printer:
•Remove any media or ribbon from the printer to avoid damaging the printer.
•Carefully pack the printer into the original container or a suitable alternate container to avoid damage during transit. A shipping container can be purchased from Zebra if the original packaging has been lost or destroyed.
10/21/05 | S4M User Guide |