48Operations
Position the Media Sensors
Figure 22 • Adjusting the Reflective Sensor
1
2
3
4 
1Printhead assembly
2Reflective sensor
3Adjustment lever
4Printhead release latch
To adjust the reflective sensor, complete these steps:
1.See Figure 22. Press the printhead release latch.
2.Lift the printhead until it latches open.
3.Locate the reflective sensor positioning lever.
4.Move the reflective sensor positioning lever across the width of the media until the reflective sensor aligns with the gap or notch.
5.Close the printhead assembly.
S4M User Guide | 10/21/05 |