Operations 41

Load Ribbon

Load Ribbon

Note • This section applies only to printers that have the Thermal Transfer option installed.

The ribbon supply spindle in your printer is a dual-tension variety. Most applications require the spindle to be in the normal position. The low tension position is recommended only when a narrow ribbon is used or if normal tension hampers the ribbon movement.

Note • Always use ribbon that is wider than the media to protect the printhead from wear. For direct thermal printing, do not load ribbon in the printer.

Figure 19 • Ribbon Path

2

3

4

1

1Printhead assembly

2Ribbon supply spindle

3Ribbon take-up spindle

4Tension blades

10/21/05

S4M User Guide

13290L-001 Rev. A