38Operations

Load Media in Peel-Off Mode

6.Feed the media under the dancer assembly, through the slot in the transmissive sensor, and under the ribbon sensor. Push the media to the back of the transmissive sensor.

3

2

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1Dancer assembly

2Transmissive sensor

3Ribbon sensor

7.Push down the peel-off mechanism release lever to open the peel assembly.

8.Pull approximately 18 in. (500 mm) of media through the front of the printer.

9.Remove the exposed labels so that only the liner remains.

13290L-001 Rev. A

S4M User Guide

10/21/05