Configuration 69

Control Panel LCD Display

Table 11 • Printer Parameters, Level 3 (Page 5 of 9)

Parameter

Explanation

HEXDUMP

Hex Dump

(ZPL, EPL, APL-D modes)

The hexadecimal dump mode is a troubleshooting tool for checking the

 

interconnection between the printer and the host computer. When YES is

 

selected, all data sent from the host computer to the printer prints as

 

straight ASCII characters, with the hexadecimal value below the ASCII

 

text. The printer prints all characters received, including control codes,

 

such as CR (carriage return). A sample printout is shown in

 

Communications Diagnostics Test on page 103.

 

Selections: NO, YES

 

Default Value: NO

 

To modify this parameter:

 

• Press the up or down arrow to scroll through the selections.

 

 

CHANGE RTC DATE

Set RTC (Real-time clock) Date

 

If RTC is installed, this parameter allows you to set the RTC date.

 

Note • The printer saves the RTC date immediately.

 

To modify this parameter:

 

1. Press ENTER.

 

The printer displays the current RTC date.

 

2. Modify the values as follows:

 

• Press the right arrow to move to the next digit position.

 

• To increase the value, press the up arrow.

 

• To decrease the value, press the down arrow.

 

3. Press ENTER to accept the value shown.

 

 

CHANGE RTC TIME

Set RTC (Real-time clock) Time

 

If RTC is installed, this parameter allows you to set the RTC time.

 

Note • The printer saves the RTC time immediately.

To modify this parameter:

1.Press ENTER.

The printer displays the current RTC time.

2.Modify the values as follows:

•Press the right arrow to move to the next digit position.

•To increase the value, press the up arrow.

•To decrease the value, press the down arrow.

3.Press ENTER to accept the value shown.

10/21/05

S4M User Guide

13290L-001 Rev. A