| Configuration |
| 75 | |
|
| |||
| Control Panel LCD Display |
|
| |
Table 12 • Print Server LCD Displays (Page 2 of 2) | ||||
|
|
| ||
Parameter | Explanation | |||
|
| |||
CHANGE GATEWAY | Change the Gateway |
| ||
| This parameter can be modified only when PERMANENT is selected for | |||
| OBTAIN IP ADDRESS. | |||
| Selections: 0 to 255 for each field | |||
| Default Value: 0.0.0.0 | |||
| Note • Leading zeroes are not shown in the address. If an IP | |||
| address contains more digits than can be displayed at one time, use | |||
| the left or right arrows to scroll through the digits. | |||
| To modify this parameter: | |||
| • To increase the value, press the up arrow. | |||
| • To decrease the value, press the down arrow. | |||
|
|
| ||
CHANGE IP PROTOCOL | Change the IP Protocol | |||
| Determines the method(s) by which the print server (wired or wireless) | |||
| receives the IP address from the server. | |||
| This parameter can be modified only when AUTO SELECT is selected | |||
| for OBTAIN IP ADDRESS. | |||
| Selections: ALL, GLEANING ONLY, RARP, BOOTP, DHCP, | |||
| DHCP AND BOOT | |||
| Default Value: ALL | |||
| To modify this parameter: | |||
| • Press the up or down arrow to scroll through the selections. | |||
|
|
|
|
|
10/21/05 | S4M User Guide |