74Configuration

Control Panel LCD Display

ZebraNet® Wired and Wireless Print Server LCD Displays

The menu options shown in Table 12 display only if you have the ZebraNet PrintServer II, or 10/100 PrintServer, or Wireless Print Server installed and are operating in ZPL or EPL mode. These parameters are considered part of Level 3.

Table 12 • Print Server LCD Displays (Page 1 of 2)

Parameter

Explanation

OBTAIN IP ADDRESS

Obtain an IP Address

 

Selects the method by which an IP address will be assigned to the printer.

 

Selections: AUTO SELECT (dynamic), PERMANENT (user-specified)

 

Default Value: AUTO SELECT

 

To modify this parameter:

 

• Press the up or down arrow to scroll through the selections.

 

 

CHANGE IP ADDRESS

Change the Printer’s IP Address

 

This parameter can be modified only when PERMANENT is selected for

 

OBTAIN IP ADDRESS.

 

Selections: 0 to 255 for each field

 

Default Value: 0.0.0.0

 

Note • Leading zeroes are not shown in the address. If an IP

 

address contains more digits than can be displayed at one time, use

 

the left or right arrows to scroll through the digits.

 

To modify this parameter:

 

• To increase the value, press the up arrow.

 

• To decrease the value, press the down arrow.

 

 

CHANGE SUBNET

Change the Subnet

 

This parameter can be modified only when PERMANENT is selected for

 

OBTAIN IP ADDRESS.

 

Selections: 0 to 255 for each field

 

Default Value: 0.0.0.0

 

Note • Leading zeroes are not shown in the address. If an IP

 

address contains more digits than can be displayed at one time, use

 

the left or right arrows to scroll through the digits.

To modify this parameter:

•To increase the value, press the up arrow.

•To decrease the value, press the down arrow.

13290L-001 Rev. A

S4M User Guide

10/21/05