Configuration

 

67

 

 

 

 

Control Panel LCD Display

 

 

 

Table 11 • Printer Parameters, Level 3 (Page 3 of 9)

 

 

 

 

Parameter

 

Explanation

 

 

 

STATUS RESPONSE

 

Send APL-I Status Response

 

(APL-I mode only)

 

Determines if a response is sent after inquiry commands. The format is set

 

 

with the RESPONSE FORMAT parameter.

 

 

Selections: ON, OFF

 

 

Default Value: ON

 

 

To modify this parameter:

 

 

• Press the up or down arrow to scroll through the selections.

 

 

 

 

RESPONSE FORMAT

 

Select APL-I Response Format

(APL-I mode only)

 

If STATUS RESPONSE is set to ON, this parameter determines the

 

 

format of the response.

 

 

Selections: ASCII, BINARY

 

 

Default Value: ASCII

 

 

To modify this parameter:

 

 

• Press the up or down arrow to scroll through the selections.

 

 

 

 

PARITY

 

Set Parity

 

 

The parity of the printer must match the parity of the host computer for

 

 

accurate communications to take place. Select the parity that matches the

 

 

one being used by the host computer.

 

 

Selections: NONE, ODD, EVEN

 

 

Default Value: NONE

 

 

To modify this parameter:

 

 

• Press the up or down arrow to scroll through the selections.

 

 

 

 

HOST HANDSHAKE

 

Set Host Handshake

 

 

The handshake protocol of the printer must match the handshake protocol

 

 

of the host computer for proper communications to take place. Select the

 

 

handshake protocol that matches the one being used by the host computer.

 

 

Selections (ZPL, APL-D):XON/XOFF, DSR/DTR, RTS/CTS

 

 

Selections (EPL): DTR & XON/XOF, DTR, XON/XOFF

 

 

Selections (APL-I):XON/XOFF, DSR/DTR, RTS/CTS, APL-I

 

 

Default Value: XON/XOFF

 

 

To modify this parameter:

 

 

• Press the up or down arrow to scroll through the selections.

 

 

 

 

 

 

10/21/05

S4M User Guide

13290L-001 Rev. A