Configuration 59
Select a Display Language
Select a Display Language
The LANGUAGE parameter is included in password level 3 and level 4 so you can easily reach the parameter to select a familiar language if you cannot read the one being displayed.
To change the language displayed, complete these steps:
1.On the control panel, press MENU. The printer enters Setup mode.
2.Press the left arrow.
If a password is set for level 3 or 4, the printer displays ADVANCED SETUP with the level number, and the ENTER button is enabled. If no passwords are set for level 3 or 4, the printer displays LANGUAGE.
3.What does the printer display?
If the printer displays... | Then... |
ADVANCED SETUP 1* | a. | Press ENTER. | |
ADVANCED SETUP 2* |
| The printer displays PASSWORD 0000*. | |
ADVANCED SETUP 3* | b. Use the left and right arrows to enter the password | ||
ADVANCED SETUP 4 | * |
| for level 3 or 4. |
| c. | Press ENTER. | |
|
| ||
|
|
| The printer displays LANGUAGE*. |
LANGUAGE* |
| Continue with the next step. | |
*Displays in the last language selected.
4.Use the up and down arrows until you reach the language of your choice.
5.Press MENU.
The printer prompts you to accept changes.
6.Press ENTER to accept the language that you selected.
10/21/05 | S4M User Guide |