Operations 49

Load Media in Peel-Off Mode

10.Close the printhead assembly.

11.Caution • Use the peel release lever and your right hand to close the peel assembly. Do not use your left hand to assist in closing. The top edge of the peel roller/assembly could pinch your fingers.

Close the peel assembly using the peel-off mechanism release lever.

12.Set the printer to Peel-Off mode. See Select the Label Removal Method on page 74 for instructions.

13.If the printer is paused (the PAUSE light is blinking), press PAUSE to enable printing. Peeling starts automatically.

6/15/09

S4M User Guide

13290L-004 Rev. A