60Operations

Select or Adjust the Media Sensors

Figure 15 • Adjusting the Reflective Sensor

1

2

3 4

1Printhead assembly

2Reflective sensor

3Reflective sensor positioning lever

4Printhead release latch

To adjust the reflective sensor, complete these steps:

1.See Figure 15. Press the printhead release latch.

2.Lift the printhead until it latches open.

3.Locate the reflective sensor positioning lever.

4.Move the reflective sensor positioning lever across the width of the media until the reflective sensor aligns with the gap or notch.

5.Close the printhead assembly.

13290L-004 Rev. A

S4M User Guide

6/15/09