Operations 51

Load Media in Cutter Mode

3.Press the printhead release latch to open the printhead assembly. Lift the printhead until it latches open.

4.Slide out the media guide.

5.Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers.

Feed the media under the dancer assembly (1), through the slot in the transmissive sensor (2—standard transmissive sensor shown), under the printhead-open sensor (3), and through the cutter (4).

4

3

2

1

 

6/15/09

S4M User Guide

13290L-004 Rev. A