Configuration

 

83

 

 

 

Control Panel Parameters

 

 

 

Table 15 • Printer Parameters, Password Level 3 (Page 7 of 10)

 

 

 

Parameter

Explanation

 

 

RIBBON

Set Ribbon Use

 

 

Note • This parameter appears only for printers that have the

 

Thermal Transfer option installed.

 

Specifies the printing method: thermal transfer (using ribbon) or

 

direct thermal (no ribbon).

 

Selections:

 

• YES (thermal transfer mode, with ribbon)

 

• NO (direct thermal mode, no ribbon)

 

Default Value: YES

 

To modify this parameter:

 

• Press the up or down arrow to scroll through the selections.

 

 

ZPL OVERRIDE

Override Certain ZPL Commands

(ZPL mode only)

Allows the following ZPL commands to override the user (printer)

 

settings:

 

• ^MM (media mode)

 

• ^MT (media type direct thermal or thermal transfer)

 

• ^MN (media non-continuous or continuous)

 

Selections:

 

• NO—tells the printer to ignore the listed ZPL commands.

 

• YES—allows the printer to accept the listed ZPL commands.

 

Default Value: YES

 

To modify this parameter:

 

• Press the up or down arrow to scroll through the selections.

6/15/09

S4M User Guide

13290L-004 Rev. A