78Configuration

Control Panel Parameters

Table 15 • Printer Parameters, Password Level 3 (Page 2 of 10)

Parameter

Explanation

 

 

MODULE A

Set Module A Storage Device for APL-D

(APL-D mode only)

This parameter allows you to assign an actual 512 KB memory device to a

 

module letter.

 

Selections: NONE, RAM 1, RAM 2, FLASH 1, FLASH 2

 

Default Value: NONE

 

To modify this parameter:

 

• Press the up or down arrow to scroll through the selections.

 

 

MODULE B

Set Module B Storage Device for APL-D

(APL-D mode only)

This parameter allows you to assign an actual 512 KB memory device to a

 

module letter.

 

Selections: NONE, RAM 1, RAM 2, FLASH 1, FLASH 2

 

Default Value: NONE

 

To modify this parameter:

 

• Press the up or down arrow to scroll through the selections.

 

 

PARALLEL COMM.

Set Parallel Communications

 

Select the communications port that matches the one being used by the host

 

computer.

 

Selections: UNIDIRECTIONAL, BIDIRECTIONAL

 

Default Value: UNIDIRECTIONAL

 

To modify this parameter:

 

• Press the up or down arrow to scroll through the selections.

 

 

PRINT PAGE

Print Stored APL-I Page

(APL-I mode only)

Up to 20 pages can be stored and printed.

 

Selections: 0 through 19

 

Default Value: 0

 

To modify this parameter:

 

• To increase the value, press the up arrow.

 

• To decrease the value, press the down arrow.

 

 

PRINT FORMAT

Print Stored APL-I Format

(APL-I mode only)

Up to 100 formats can be stored and printed.

 

Selections: 0 through 99

 

Default Value: 0

To modify this parameter:

•To increase the value, press the up arrow.

•To decrease the value, press the down arrow.

13290L-004 Rev. A

S4M User Guide

6/15/09