74Configuration

Control Panel Parameters

Table 14 • Printer Parameters, Password Levels 1 and 2 (Page 3 of 5)

Parameter

Explanation

 

 

MEDIA TYPE

Set Media Type

 

Tells the printer which type of media you are using.

 

Selections:

 

• GAP/NOTCH—Use for non-continuous web media, non-continuous

 

fanfold media, and tag stock.

 

• CONTINUOUS—Use for media that does not have divisions

 

between labels.

 

• MARK—Use for non-continuous black mark media.

 

Default Value: GAP/NOTCH

 

To modify this parameter:

 

• Press the up or down arrow to scroll through the selections.

 

 

SENSOR SELECT

Select the Media Sensor

 

Use the setting that gives the best results. You can use the reflective sensor

 

for most media.

 

• REFLECTIVE—Use with black mark media and most other media

 

types.

 

• TRANSMISSIVE—Use with any media (other than black mark

 

media) that does not work well with the reflective sensor.

 

To use the transmissive sensor with media that has holes or notches,

 

verify that the holes or notches pass through the sensor so that the

 

sensor can detect them. If the holes or notches do not pass through

 

the sensor, use the reflective sensor.

 

Default Value: REFLECTIVE

 

To modify this parameter:

 

• Press the up or down arrow to scroll through the selections.

 

 

REMOVAL

Select the Label Removal Method

 

The label removal must correspond to the print mode (see Print Modes

 

and Printer Options on page 38). Be sure to select a label removal mode

 

that your hardware configuration supports because some of the selections

 

displayed are for optional printer features.

 

Selections: TEAR, PEEL, CUTTER, REWIND, DELAYED CUT

 

Default Value: TEAR

 

To modify this parameter:

 

• Press the up or down arrow to scroll through the selections.

 

 

13290L-004 Rev. A

S4M User Guide

6/15/09