94Routine Maintenance Cleaning Procedures

Clean the Peel Assembly

The peel assembly, which is part of the Peel-Off option, consists of several spring-loaded rollers to ensure the proper roller pressure. Clean the pinch roller and tear-off/peel-off bar if adhesive buildup begins to affect peel performance.

Caution • Do not use your left hand to assist in closing the Peel assembly. The top edge of the Peel roller/assembly could pinch your fingers.

Caution • The printhead may be hot and could cause severe burns. Allow the printhead to cool.

If adhesive buildup affects peel-off performance, complete these steps:

1.Press the printhead release latch to open the printhead assembly. Lift the printhead until it latches open.

2.Push down the peel-off mechanism release lever to open the peel assembly.

3.Remove any media backing to expose the pinch roller.

13290L-004 Rev. A

S4M User Guide

6/15/09