MIDI settings: pages 4 - 6
The pedals and foot switches of the 8080 can be used to send MIDI control change messages from the MIDI OUT jack. Pages 4 through 6 of the Utility mode serve to make MIDI settings, such as selecting the MIDI channel and control change numbers.
Parameters | Comment | Values |
PAGE 4 |
|
|
|
|
|
|
| q CH (Channel) |
MIDI | CTRLchg | CH=q |
|
|
|
| q | |
4 | CP1= w | CP2=e | MIN | MAX 1 | 2 | MIN | MAX | w CP1 (Control Pedal 1) |
| 3 | 4 |
|
|
| |||
|
| w |
|
|
|
| e | e CP2 (Control Pedal 2) |
|
|
| MIN | MAX |
| MIN | MAX | |
| UTILITY |
|
|
|
|
|
|
|
| PAGE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| r SW1 (Switch 1) |
PAGE 5 |
|
|
|
|
|
|
|
|
MIDI | CTRLchg SW1=r |
|
|
|
| r | t SW2 (Switch 2) | |
5 | SW2= t | SW3=y | MIN | MAX 1 | 2 | MIN | MAX |
|
| 3 | 4 |
| y y SW3 (Switch 3) | ||||
|
| t |
|
|
|
| ||
|
|
| MIN | MAX |
| MIN | MAX |
|
| UTILITY |
|
|
|
|
|
| u SW4 (Switch 4) |
| PAGE |
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
PAGE 6 |
|
|
|
|
|
|
| i SW5 (Switch 5) |
MIDI | SW4= u | SW5=i u |
|
|
|
| i | o MUT (Mute) |
6 | MUT= o | BYP=!0 | MIN | 3 | 4 | MIN | MAX | |
|
|
| MAX 1 | 2 |
| |||
|
| o |
|
|
|
| !0 |
|
|
|
| MIN | MAX |
| MIN | MAX | !0BYP (Bypass) |
|
|
|
|
|
|
|
| |
Selects the MIDI OUT channel of the 8080. | 1 – 16 | |
Sets the control change number for |
| 1 – 31 (Default: 7) |
CONTROL pedal 1. |
| |
Sets the control change number for |
| 1 – 31 (Default: 1) |
CONTROL pedal 2. |
| |
Sets the control change number for | 64 | – 95 (Default: 70) |
foot switch 1. | ||
Sets the control change number for | 64 | – 95 (Default: 71) |
foot switch 2. | ||
Sets the control change number for | 64 | – 95 (Default: 72) |
foot switch 3 | ||
Sets the control change number for | 64 | – 95 (Default: 73) |
foot switch 4. | ||
Sets the control change number for | 64 | – 95 (Default: 74) |
foot switch 5. | ||
Sets the control change number | 64 | – 95 (Default: 80) |
for mute on/off. | ||
Sets the control change number | 64 | – 95 (Default: 91) |
for bypass on/off. | ||
Operation Advanced
✎ Items w and e produce continuous output corresponding to the pedal action. Items r through !0cause the output to be NOeither 127 or 0, depending on the foot switch on or off condition.
HINT When switching patches in Play mode, a program change message ranging from 0 (U01) to 99 (P95) is always output from the MIDI OUT jack.
✎The control change messages set by items r – i for the foot switches are output only in manual mode and edit mode. NOIn play mode, operating the foot switches causes program change messages to be output.