COMP EFF1 DIST | EQ | EFF2 EFF3 DLY | REV | TOTAL |
Strictly speaking, this module is not an effect module, but it serves for setting various parameters for the CONTROL pedals and CONTROL switches. It also contains settings for the seamless function, for editing patch names and for other parameters that affect all patches. The module has five pages which are switched with the UTILITY/PAGE key.
Page 1: Serial connection/parallel connection
Determines whether the EFF2 and EFF3 modules are connected in series or parallel.
|
| TYPE |
|
|
| PAGE 1 SERIAL/PARALLEL: | – TYPE + | SERIAL/PARALLEL: | ||
1 | EF2 ΠEF3 |
| 1 | EF2 EF3 |
Serial connection |
| Parallel connection | ||
Pressing the TYPE - key selects serial connection. "→" appears on the display.
Pressing the TYPE + key selects parallel connection. "❙❙" appears on the display.
Page 2: CONTROL pedal and CONTROL switch settings
| PAGE 2 CONTROL SET: | CSW=q | |||
| 2 CP1= w |
| CP2=e | ||
|
|
|
| q |
MIN | MAX 1 | 2 | MIN | MAX |
| 3 | 4 |
|
|
w |
|
|
| e |
MIN | MAX |
| MIN | MAX |
Parameters | Comment | Values |
qCSW (Control Switch) Sets the CONTROL switch module function. OFF, CMP, EF1, DST, VOL,EF2, EF3, DLY, REV
wCP1 (Control Pedal 1) Sets the CONTROL pedal 1 module function. OFF, CMP, EF1, DST,VOL, EF2, EF3, DLY, REV
eCP2 (Control Pedal 2) Sets the CONTROL pedal 2 module function. OFF, CMP, EF1, DST,VOL, EF2, EF3, DLY, REV
✎ "VOL" is not the volume of a specific patch but the overall volume.
NO
In principle, the CONTROL switches cannot be used to control the same effect module as CONTROL pedal 1 or CONTROL pedal 2. If several ✎NOcontrollers are set to the same module on this page, priority will be assigned in the order CP1, CP2, CSW when returning to the Play mode.
Only the controller with the highest priority is active and the others are set to "OFF" ( 
p. 27).
However, if the "CSW" parameter in the RTM page of the DLY module is set to a different item than the "RTM" parameter, the DLY module
can be assigned to CONTROL pedal 1 or 2 and the CONTROL switches at the same time. ( 
p. 27).
Page 3: Seamless function settings
The seamless function lets the reverb or delay sound from the previous effect linger on when you switch effects, creating a smooth transition without audible breaks.
PAGE 3 |
|
|
|
|
|
|
|
| Parameters | Comment | Values |
|
|
|
|
|
|
|
| ||||
| SEAMLESS FUNCTION: |
| ||||||||||
|
|
|
| ||||||||
| 3 TIM= q | CUV=w |
|
|
|
| |||||
q TIM (SEAM Time) | Sets the time until the reverberation subsides, in | OFF, 0.1 – 99 | |||||||||
|
|
|
|
|
|
|
|
| w CUV (SEAM Curve) | ||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |||
|
| MIN | MAX 1 |
| 2 MIN | MAX | The reverberation attenuation pattern can be set to | ||||
|
|
| 3 |
| 4 |
|
|
|
| "LNR" (reverberation is cut when the time interval | |
| q |
|
|
|
| w |
| ||||
|
|
|
|
|
| ||||||
|
|
|
|
|
| ||||||
|
|
|
|
|
| set with the "TIM" parameter has elapsed) or |
| ||||
|
| MIN | MAX |
| MIN | MAX |
|
| |||
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
| "HLD"(reverberation continues for the programmed | |
|
|
|
|
|
|
|
|
|
| duration). | LNR, HLD |
|
|
|
|
|
|
|
|
|
|
|
|
✎ For reverb, the seamless function operates only if reverb in the newly selected module is off. If the programmed reverb time of the NOpatch is shorter than the time set with the "TIM" parameter, the programmed reverb time has priority.
Parameters and Types Effect
63■