Zoom 8080 HOLD: Hold Delay, VANA: Vintage Analog Delay, FB= e, Mix=r, CSWŒy, FB= e, Mix=r, CSW=y, RTMŒ t, RTMŒ t, VANA TIM= q w(ms), HOLD TIM= q w (mS)

HOLD: Hold Delay

This delay effect samples a phrase and repeats it. When the CONTROL switch is pressed once, the sound is sampled for the preset delay time. Pressing the CONTROL switch again causes the phrase to be repeated.

								Parameters	Comment		Values
HOLD TIM= q w (mS)		q					w	q TIM (Time)	Set the delay time in 100-ms steps.	0 – 40 (x100)
FB= e	Mix=r	MIN	3	4	MIN	MAX
			MAX 1	2
PAGE 1		e					r w (mS) (Time Fine)		Fine adjusts the delay time in 1-ms steps.		0 – 99
		MIN	MAX		MIN	MAX		e FB (Feedback)	Sets the feedback amount.		0 – 10
UTILITY
PAGE
								r Mix (Mix)	Adjusts the mix between original sound and		0 – 100
PAGE 2									effect sound.
HOLD		MIN	MAX 1	2	MIN	MAX		t RTM (RTM Destination)	Shows which RTM parameter is being controlled.		Mix
			3	4
RTMŒ t	CSWŒy	t					y	y CSW (CSWselect)	Shows the parameter that is being controlled by
		MIN	MAX		MIN	MAX					HLD
									the CONTROL switches.

VANA: Vintage Analog Delay

Vintage analog delay type sound with depth and body.

Parameters Comment Values

VANA TIM= q w(ms)		q				w	q TIM (Time)
FB= e	Mix=r	MIN	3	4	MIN	MAX	w (mS) (Time Fine)
			MAX 1	2
PAGE 1		eMIN	MAX		MIN	MAX r	e FB (Feedback)
UTILITY							r Mix (Mix)
PAGE
PAGE 2							t RTM (RTM Destination)
VANA		MIN	MAX 1	2	MIN	MAX
		t	3	4		y	y CSW (CSWselect)
RTMΠt	CSW=y
		MIN	MAX		MIN	MAX

Set the delay time in 100-ms steps.	0 – 10 (x100)
Fine adjusts the delay time in 1-ms steps.		0 – 99
Sets the feedback amount.		0 – 10
Adjusts the mix between original sound and		0 – 100
effect sound.
Shows which RTM parameter is being controlled.		Mix
Sets the CONTROL switch function to "Mix"
(balance between original sound and effect sound)		Mix, Tap
or "Tap" (tapping input of delay time).

Parameters and Types Effect

61■