Zoom 8080 PBND: Pitch Bender, SLOW: Slow Attack, MET: Metallic, PBND, BAL=r, DIR=y, SPD=w, SEL=r, DIR=y, BAL=r, AFT= e, RTMΠt, CUV= e, RTMΠt, FRQ= e, RTMΠt, SPD=w q

PBND: Pitch Bender

This effect detects the picking intensity and accordingly bends the pitch up or down.

Parameters Comment Values

qBFR (Before Pitch) Sets the pitch at the start of the effect. Setting range

								is ±1 or ± 2 octaves, in 1-semitone steps.	-24, -12, -11,
PBND BFR= q	SPD=w q					w			...0,..., +11,
AFT= e	BAL=r		MIN	3	4	MAX			+12, +24
				MAX 1	2 MIN
PAGE 1		e				r	w SPD (Speed)	Sets the pitch bend rate.	1 – 100
			MIN	MAX	MIN	MAX	e AFT (After Pitch)	Sets the pitch at the end of the effect. Setting range
UTILITY
PAGE
								is ±1 or ± 2 octaves, in 1-semitone steps.	-24, -12, -11,
PAGE 2									...0,..., +11,
									+12, +24
PBND			MIN	MAX 1	2 MIN	MAX
		t		3	4	y	r BAL (Balance)	Sets the balance between original sound and
RTMΠt	DIR=y								0 Р100
			MIN	MAX	MIN	MAX		effect sound.
							t RTM (RTM Destination)	Shows which RTM parameter is being controlled.	SPD
							y DIR (RTM Direction)	Sets the RTM direction.	NML, INV

SLOW: Slow Attack

This effect has two selectable types: slow attack for automatically creating a "violin" playing style, and dynamic filter which opens up according to picking intensity and emphasizes the low or high frequencies.

							Parameters	Comment	Values
SLOW SNS= q	SPD=w	q				w	q SNS (Sensitivity)	Sets the volume attenuation depth and filter	0 – 50
CUV= e	SEL=r	MIN	MAX 1	2	MIN	MAX		alteration width.
			3	4		r	w SPD (Speed)	Sets the time until the volume level rises or the
PAGE 1		e
		MIN	MAX		MIN	MAX		filter effect becomes audible. Lower values result
UTILITY								in slower action.	1 – 100
PAGE
PAGE 2							e CUV (Curve)	Sets the curve for volume change and filter action.	0 – 3
							r SEL(Type Select)	"SLO" selects the slow attack affect and "DYN"
SLOW		MIN	MAX 1	2	MIN	MAX			SLO, DYN
		t	3	4		y		the dynamic filter.
RTMΠt	DIR=y
							t RTM (RTM Destination)	Shows which RTM parameter is being controlled.	SPD
		MIN	MAX		MIN	MAX
							y DIR (RTM Direction)	Sets the RTM direction.	NML, INV

✎ In this effect, the action of parameters 1-3 depends on parameter 4.

NO

MET: Metallic

This a ring modulator effect which produces a metallic sound. The modulation frequency changes with time.

							Parameters	Comment	Values
MET DPT= q SPD=w q						w	q DPT (Depth)	Sets the modulation frequency for picking.	0 – 10
FRQ= e	BAL=r	MIN	3	4	MIN	MAX
			MAX 1	2
PAGE 1	e					r	w SPD (Speed)	Sets the rate at which the modulation frequency	1 – 100
		MIN	MAX		MIN	MAX		changes.
UTILITY							e FRQ (Frequency)	Sets the end frequency for the modulation.	0 – 10
PAGE
PAGE 2							r BAL (Balance)	Sets the balance between original sound and	0 – 100
								effect sound.
MET		MIN	MAX 1	2	MIN	MAX
	DIR=y t		3	4		y	t RTM (RTM Destination)	Shows which RTM parameter is being controlled.	BAL
RTMΠt
		MIN	MAX		MIN	MAX	y DIR (RTM Direction)	Sets the RTM direction.	NML, INV

Parameters and Types Effect

57■