Zoom 8080 REV (Reverb) Module, HALL: Reverb Hall, ROOM: Reverb Room, PPD: Ping-PongDelay, HALL, PDl=w, Mix=r, DIR=y, PDl=w, Mix=r, DIR=y, FB= e, Mix=r, DIR=u, HiC= e

Parameters and Types Effect

COMP EFF1 DIST EQ EFF2 EFF3 DLY REV TOTAL

REV (Reverb) Module

This effect module contains three types of stereo reverberation effects.

HALL: Reverb Hall

This effect recreates the reverberation of a concert hall.

							Parameters	Comment	Values
HALL TIM= q	PDl=w	q				w	q TIM (Time)	Sets the reverb duration.	0 – 10
HiC= e	Mix=r	MIN	3	4	MIN	MAX	w PDl (Pre Delay)	Sets the time interval until the early reflections.
			MAX 1	2
PAGE 1		e				r		Higher values result in a larger simulated space.	0 – 100
		MIN	MAX		MIN	MAX	e HiC (High Cut)	Controls high-frequency attenuation in the effect
UTILITY
PAGE								sound.	0 – 30
PAGE 2							r Mix (Mix)	Adjusts the mix between original sound and effect	0 – 100
								sound.
HALL		MIN	MAX 1	2	MIN	MAX
		t	3	4		y	t RTM (RTM Destination)	Shows which RTM parameter is being controlled.	Mix
RTMΠt	DIR=y
		MIN	MAX		MIN	MAX	y DIR (RTM Direction)	Sets the RTM direction.	NML, INV

ROOM: Reverb Room

This effect recreates the reverberation of a room (in a studio).

							Parameters	Comment	Values
ROOM TIM= q	PDl=w	q	3	4		w	q TIM (Time)	Sets the reverb duration.	0 – 10
HiC= e	Mix=r	MIN			MIN	MAX
			MAX 1	2
PAGE 1		e				r	w PDl (Pre Delay)	Sets the time interval until the early reflections.	0 – 100
UTILITY		MIN	MAX		MIN	MAX		Higher values result in a larger simulated space.
PAGE							e HiC (High Cut)	Controls high-frequency attenuation in the effect
									0 – 30
PAGE 2								sound.
							r Mix (Mix)	Adjusts the mix between original sound and effect
ROOM		MIN	MAX 1	2	MIN	MAX			0 – 100
			3	4				sound.
RTMΠt	DIR=y	t				y	t RTM (RTM Destination)	Shows which RTM parameter is being controlled.	Mix
		MIN	MAX		MIN	MAX
							y DIR (RTM Direction)	Sets the RTM direction.	NML, INV

PPD: Ping-Pong Delay

This is a stereo delay effect where the delay sound alternates between right and left. It can also be switched to mono.

								Parameters	Comment		Values
PPD	TIM=qw (mS)		q				w	q TIM (Time)	Set the delay time in 100-ms steps.	0 – 20 (X100)
	FB= e	Mix=r	MIN	3	4	MIN	MAX	w (mS) (Time Fine)	Fine adjusts the delay time in 1-ms steps.		0 – 99
				MAX 1	2
PAGE 1			eMIN	MAX		MIN	MAX r	e FB (Feedback)	Sets the feedback amount.		0 – 30
	UTILITY							r Mix (Mix)	Adjusts the mix between original sound and effect
	PAGE
											0 – 100
									sound.
PAGE 2			t					t SEL (Type Select)	"MN" selects monaural delay and "PPD" selects
PPD	SEL= t		MIN	MAX 1	2	MIN	MAX				MN, PPD
									ping- pong delay.
			yMIN	3	4		MAX u
	RTMΠy	DIR=u		MAX		MIN		y RTM (RTM Destination)	Shows which RTM parameter is being controlled.		Mix
								u DIR (RTM Direction)	Sets the RTM direction.		NML, INV

■62