Zoom 8080 DLY: Normal Delay, TWIN: Twin Delay, DLY (Delay) Module, FB= e, Mix=r, SEL=y, Mx2=r, SEL=y, HiD= t, Mx1= e, RTMΠu, CSW=i u, CSW=i u, TWIN FB= t, TIM= qw(mS)

DLY (Delay) Module

COMP EFF1 DIST EQ EFF2 EFF3 DLY REV TOTAL

Parameters and Types Effect

This module provides four types of delay effects including ultra-long delay of up to 4 seconds and an analog-type delay.

DLY: Normal Delay

This is a traditional delay effect with delay times up to 4 seconds. You can select monaural delay or ping-pong delay. Using one of the CONTROL switches, tapping input of delay time is possible.

								Parameters	Comment	Values
								q TIM (Time x 100ms)	Sets the delay time in 100-ms steps.	0 – 40 (x100)
DLY	TIM= qw(mS)							w (mS) (Time Fine)	Fine adjusts the delay time in 1-ms steps.	0 – 99
			q				w	e FB (Feedback)	Sets the feedback amount.	0 – 10
	FB= e	Mix=r			3	4
				MIN	MAX 1	2 MIN	MAX
PAGE 1			e				r	r Mix (Mix)	Adjusts the mix between original sound and	0 – 100
	UTILITY			MIN	MAX	MIN	MAX		effect sound.
	PAGE							t HiD (High Damp)	Sets the degree of high-range attenuation during
										0 – 10
PAGE 2			t				y		feedback.
								y SEL (Type Select)	Can be set to "MN" (mono delay) or
	HiD= t	SEL=y			MAX 1	2 MIN
DLY				MIN			MAX		"PPD" (ping-pong delay).	MN, PPD
					3	4
	RTMΠu	CSW=i u					i	u RTM (RTM Destination)	Displays the parameter that is being controlled
				MIN	MAX	MIN	MAX			Mix
									by RTM.

iCSW (CSWselect) Sets the CONTROL switch function to "Mix" (balance between original sound and effect sound)

or "Tap" (tapping input of delay time). Mix, Tap

TWIN: Twin Delay

This delay effect uses two delay times. Time1 is selected by the user and Time2 is the double of Time1. This allows one player to sound like three.

							Parameters	Comment	Values
							q TIM (Time1)	Set the Time1 delay time in 100-ms steps.	0 – 20 (x100)
TWIN TIM= q w(mS)							w (mS) (Time Fine)	Fine adjusts the Time1 delay time in 1-ms steps.	0 – 99
		qMIN				w	e Mx1 (Time1 Mix)	Adjusts the mixing amount of the Time1 effect
Mx1= e	Mx2=r		MAX 1	2 MIN	MAX				0 – 100
			3	4				sound.
PAGE 1		e				r
							r Mx2 (Time2 Mix)	Adjusts the mixing amount of the Time2
		MIN	MAX	MIN	MAX
UTILITY								(double of Time1) effect sound.	0 – 100
PAGE
PAGE 2		tMIN				y	t FB (Feedback)	Sets the feedback amount.	0 – 10
	SEL=y		MAX 1	2 MIN	MAX		y SEL (Type Select)	Determines the connection type within the	L-R, R-L,
TWIN FB= t			3	4				module (see illustration below).	MN, SPC
RTMΠu	CSW=i u					i
							u RTM (RTM Destination)	Displays the parameter that is being controlled
		MIN	MAX	MIN	MAX
								by RTM.	Mix

iCSW (CSWselect) Sets the CONTROL switch function to "Mix" (balance between original sound and effect sound)

or "Tap" (tapping input of delay time). Mix, Tap

MODE1		L Ð R		MODE2		R Ð L
			L				R
FB	TIME1=MAX 2000mS			FB	TIME1=MAX 2000mS
	DELAY				DELAY
	TIME2=TIME1 X2		R		TIME2=TIME1 X2		L
			L				L
FB	TIME1=MAX 2000mS			FB	TIME1=MAX 2000mS
	DELAY				DELAY
	TIME2=TIME1 X2				TIME2=TIME1 X2
			R	FB			R
MODE3		MN		MODE4		SPC

■60