Zoom 8080 3 and, Use, for, Use, two, 2-4to, 4 and, times, while, Use the, 8080LEAD, Press the, Press the, modules for, Fsw ASSIGN:, 7SW2=EF1 SW3=DST, 8SW4=EF3 SW5=DLY

UTILITY/PAGE key

4

5

6

7

8

9

	Data entry knobs
Use	2-4 to

select effect modules

for Foot switches 1-3.

Press the once more to call up the page shown below.

Data entry knobs

Use	3 and
4 to select effect
modules for
Foot switches	4 and 5.

Press the

STORE/EXECUTE key two

times.

Press the

USER FUNCTION switch while

playing the instrument in Play mode.

Foot switches
Use the	1-5
to turn the effect

modules on and off, as desired.

This is the page for selecting the effect modules to be assigned to foot switches 4 and 5.

The Utility mode settings are stored and the unit returns to the Play mode.

This will activate Manual mode, and the effect modules that can be switched by foot switches 1-5 are shown on the display.

Fsw ASSIGN: SW1=CMP7SW2=EF1 SW3=DSTFsw ASSIGN:8SW4=EF3 SW5=DLY

Fsw ASSIGN: SW1=CMP

8SW4=DLY SW5=REV

01 8080LEAD LVL=100 AMP ÁVOL ªOFF §HLD

01	8080LEAD		MANUAL
CMP EP1 DST DLY REV
↑	↑	↑	↑	↑
SW1	SW2	SW3	SW4	SW5

Operation Advanced

✎You cannot assign the same effect module to several foot switches. Page 35.

NO

✎NOIf Utility mode settings are not stored, they will remain active only until the unit is next turned off. When turned on again, the unit reverts to the previous settings. If you wish to keep changes you have made, do not forget to press the STORE/EXECUTE key twice to perform the store process. Note that any edited patch will also be stored at this time.

37■