Zoom 8080 EFF1 Module, PEQ: 1-BandParametric EQ, PWAH: Pedal-Wah, VAWA: Vintage Auto-Wah1, Q= e, PK=w, G=w q, POS=r, SNS=y, DRY=w, POS=r, DIR=y, POS=r, OFS=y, DIR=i, ■48

Parameters and Types Effect

COMP EFF1 DIST EQ EFF2 EFF3 DLY REV TOTAL

EFF1 Module

This module contains equalizer effects and wah/modulation effects with strong characteristics. It can be inserted before or after the DIST module.

PEQ: 1-Band Parametric EQ

Parametric equalizer with high-range enhancer.

								Parameters	Comment	Values
								q FRQ (Frequency)	Sets the boost/cut frequency.	63, 160,
										400, 1.0, 2.5
PEQ	FRQ= q	G=w q		3	4		w	w G (Gain)	Sets the boost/cut amount.	-18, -16, ...,
	Q= e	POS=r	MIN			MIN	MAX			+5,+6
				MAX 1	2
PAGE 1		e					r	e Q (Q)	Sets the width of the boost/cut frequency range.	78, 2.1
			MIN	MAX		MIN	MAX
	UTILITY							r POS (Insert Position)	Sets the module insertion point. "BFR" means
	PAGE
									before the DIST module and "AFT" after the	BFR, AFT
PAGE 2		t					y		DIST module.
PEQ	EhF= t	SNS=y	MIN	MAX 1	2	MIN	MAX	t EhF	Sets the enhancer frequency.	1 - 4
				3	4
								(Enhance Frequency)
			MIN	MAX		MIN	MAX	y SNS		off, 1 – 10
									Sets the enhancer sensitivity.
								(Enhance Sensitivity)

PWAH: Pedal-Wah

Recreation of an ever-popular vintage-type pedal wah.

							Parameters	Comment	Values
PWAH FRQ= q	DRY=w	q				w	q FRQ (Frequency)	Sets the center frequency that is active	1 – 50
SEL= e	POS=r	MIN	MAX 1	2	MIN	MAX		when the patch is called.
			3	4			w DRY (Dry Mix)	Sets the balance between effect sound and dry
PAGE 1		e				r
		MIN	MAX		MIN	MAX		sound (original sound).
UTILITY								When set to 0, no original sound is output.	0 – 10
PAGE
PAGE 2							e SEL (Type Select)	Lets you select one of two wah types.	1, 2
							r POS (Insert Position)	Sets the module insertion point. "BFR" means
PWAH		MIN	MAX 1	2	MIN	MAX
			3	4				before the DIST module and "AFT" after the
RTMΠt	DIR=y	tMIN				MAX y			BFR, AFT
			MAX		MIN			DIST module.
							t RTM (RTM Destination) Shows which RTM parameter is being controlled.		FRQ
							y DIR (RTM Direction)	Sets the RTM direction.	NML, INV

VAWA: Vintage Auto-Wah 1

Recreates a vintage auto-wah sound cherished by fusion and funk musicians in the seventies and eighties.

Parameters Comment Values

qSNS (Sensitivity) Sets the wah effect sensitivity. With higher values,

VAWA SNS= q	PK=w	q					w	the wah effect starts already when strings are	1 – 50
DRV= e	POS=r	MIN	3	4	MIN	MAX		picked softly.
			MAX 1	2
PAGE 1		e					r w PK (Peak)	Higher values give a stronger wah effect.	1 – 10
		MIN	MAX		MIN	MAX	e DRV (Drive)	Sets the wah effect direction. When set to "up",
UTILITY
PAGE
								the center frequency is shifted upwards, and	dwn, up
PAGE 2		t					y	when set to "dwn" downwards.
	OFS=y							Sets the module insertion point. "BFR" means
VAWA SEL= t		MIN	3	4	MIN	MAX	r POS (Insert Position)
			MAX 1	2
RTMΠu	DIR=i	u					i	before the DIST module and "AFT" after the	BFR, AFT
								DIST module.
		MIN	MAX		MIN	MAX

tSEL (Type Select) Three filter types can be selected for the wah

	effect: Low (low-pass filter), Mid (band-pass filter),	Low,
	HiP (high-pass filter).	Mid, HiP
y OFS (Offset)	Sets the center frequency where the wah effect	Low, Hi
	becomes active.
u RTM (RTM Destination) Shows which RTM parameter is being controlled.		SNS
i DIR (RTM Direction)	Sets the RTM direction.	NML, INV

■48