Zoom 8080 AWA: Auto-Wah2, VPHA: Vintage Phaser, VIB: Vintage Vibe, OCT: Octaver, VPHA, POS=r, WAV=w, POS=e, DIR=t, VOL=w, SEL=e, POS=r, DIR=y, SEL= e, RTMΠy, RTMΠr

AWA: Auto-Wah 2

Standard auto-wah effect where wah depends on picking intensity.

						Parameters	Comment	Values
						q SNS (Sensitivity)	Sets the wah effect sensitivity.	1 – 50
AWA SNS= q DMx=w q					w	w DRY (Dry Mix)	Sets the balance between effect sound and dry
							sound (original sound).	0 – 10
SEL= e	POS=r	MIN	3	4	MAX		When set to 0, no original sound is output.
			MAX 1	2 MIN
PAGE 1	e				r	e SEL (Type Select)	Sets the wah effect direction. When set to "up",
		MIN	MAX	MIN	MAX		the center frequency is shifted upwards, and when
UTILITY
PAGE							set to "dwn" downwards.	dwn, up
PAGE 2	t					r POS (Insert Position)	Sets the module insertion point. "BFR" means
							before the DIST module and "AFT" after the
AWA OFS= t		MIN	MAX 1	2 MIN	MAX			BFR, AFT
	DIR=u yMIN		3	4	MAX u		DIST module.
RTMΠy			MAX	MIN		t OFS (Offset)	Sets the center frequency where the wah effect	Low, Hi
							becomes active.
						y RTM (RTM Destination) Shows which RTM parameter is being controlled.		SNS
						u DIR (RTM Direction)	Sets the RTM direction.	NML, INV

VPHA: Vintage Phaser 1

Sound effect with a distinct undulation. Recreates a phaser type made popular by fusion guitarists in the seventies and eighties.

VPHA SPD= q	WAV=w						Parameters	Comment	Values
		q				w
	POS=e	MIN	MAX 1	2	MIN	MAX	q SPD (Speed)	Sets the undulation speed of the phaser effect.	1 – 50
			3	4		MAX e
PAGE 1		MIN	MAX		MIN		w WAV (Wave Type)	Alters the undulation curve.	1 – 4
UTILITY							e POS (Insert Position)	Sets the module insertion point. "BFR" means
PAGE
								before the DIST module and "AFT" after the	BFR, AFT
PAGE 2								DIST module.
							r RTM (RTM Destination) Shows which RTM parameter is being controlled.		SPD
VPHA		MIN	3	4	MIN	MAX
			MAX 1	2
RTMΠr	DIR=t	r	MAX		MIN	t	t DIR (RTM Direction)	Sets the RTM direction.	NML, INV
		MIN				MAX

VIB: Vintage Vibe

Recreates a vintage-type vibe effect where the intensity and speed depends on the pedal action.

							Parameters	Comment	Values
							q DPT (Depth)	Sets the depth of the vibe effect.	1 – 50
VIB DPT= q	VOL=w	q	3	4		w	w VOL (Volume)	Sets the output level.	1 – 10
SEL=e	POS=r	MIN			MIN	MAX
			MAX 1	2
PAGE 1		e				r	e SEL (Type Select)	"CHO" causes original sound to be mixed to the
		MIN	MAX		MIN	MAX		effect sound to achieve a chorus effect.	CHO, VIB
UTILITY								"VIB" is the vibe sound only.
PAGE
							r POS (Insert Position)	Sets the module insertion point. "BFR" means
PAGE 2								before the DIST module and "AFT" after the	BFR, AFT
VIB		MIN	MAX 1	2	MIN	MAX		DIST module.
		t	3	4		y	t RTM (RTM Destination) Shows which RTM parameter is being controlled.		SPD
RTMΠt	DIR=y
		MIN	MAX		MIN	MAX	y DIR (RTM Direction)	Sets the RTM direction.	NML, INV

OCT: Octaver

Adds a 1-octave or 2-octave lower component to the original sound.

							Parameters	Comment	Values
OCT -1L= q -2L=w							q -1L (-1 Octave Level)	Sets the output level of the 1-octave lower	0 – 10
		q				w	w -2L (-2 Octave Level)	component.
	POS= e	MIN	3	4	MAX			Sets the output level of the 2-octave lower
			MAX 1	2 MIN
PAGE 1						e		component.	0 – 10
PAGE		MIN	MAX	MIN	MAX		e POS (Insert Position)	Sets the module insertion point. "BFR" means
UTILITY
								before the DIST module and "AFT" after the	BFR, AFT
PAGE 2						r		DIST module.
							r DRY (Dry Level)	Sets the original sound output level.	0 – 10
OCT	DRY=r	MIN	MAX 1	2 MIN	MAX
			3	4		y t RTM (RTM Destination) Shows the parameter that is being controlled by RTM.
RTMΠt	DIR=y	t
		MIN	MAX	MIN	MAX			The control range extends from "WLv" (Wet Level)
								zero to the preset value set with "-1L" and "-2L".	WLv
							y DIR (RTM Direction)	Sets the RTM direction.	NML, INV

Parameters and Types Effect

49■