Zoom 8080 VCHO: Vintage Chorus, VBRT: Vibrato, STEP: Step, PAN: Tremolo/Pan, VBRT, STEP, VbS=w, SEL=r, DIR=y, SPD=w, TRG=r, DIR=y, SPD=w, FB= e, WAV=r, DIR=y, SPD=w

VCHO: Vintage Chorus 2

Recreates a traditional guitar chorus effect.

Parameters Comment Values

qCHO (Chorus Intensity) Sets the chorus depth when the SEL parameter is

								set to "CHO".	0 – 50
VCHO CHO= q	VbS=w	q	3	4		w	w VbS (Vibrato Speed)	Sets the vibrato speed when the SEL parameter is	1 – 100
VbD= e	SEL=r	MIN			MIN	MAX		set to "VIB".
			MAX 1	2
PAGE 1		e				r	e VbD (Vibrato Depth)	Sets the vibrato depth when the SEL parameter is
		MIN	MAX		MIN	MAX			0 – 10
UTILITY								set to "VIB".
PAGE
							r SEL (Type Select)	Serves to select the chorus or vibrato effect.	CHO, VIB
PAGE 2							t RTM (RTM Destination)	Displays the parameter that is being controlled by
VCHO		MIN	MAX 1	2	MIN	MAX
								RTM. When the SEL parameter is set to "CHO",
			3	4
RTMΠt	DIR=y	t				y		"Mix" (balance between original sound and effect
		MIN	MAX		MIN	MAX		sound) is controlled. When the SEL parameter is
									Mix, SPD
								set to "VIB", "SPD" is controlled.
							y DIR (RTM Direction)	Sets the RTM direction.	NML, INV

VBRT: Vibrato

Vibrato effect with periodically altered pitch.

							Parameters	Comment	Values
VBRT DPT= q	SPD=w	q				w	q DPT (Depth)	Sets the depth of the vibrato effect.	0 – 50
RTm= e	TRG=r	MIN	3	4	MIN	MAX	w SPD (Speed)	Sets the speed of the vibrato effect.	1 – 100
			MAX 1	2
PAGE 1		e				r	e RTm (Rise Time)	Sets the time interval between picking and the
		MIN	MAX		MIN	MAX			0 – 10
UTILITY								start of vibrato.
PAGE
							r TRG (Trigger)	When this parameter is set to "On", vibrato is	off, on
PAGE 2								triggered by the picking action.
VBRT		MIN	MAX 1	2	MIN	MAX	t RTM (RTM Destination)	Shows which RTM parameter is being controlled.	SPD
	DIR=y	t	3	4		y
RTMΠt
		MIN	MAX		MIN	MAX	y DIR (RTM Direction)	Sets the RTM direction.	NML, INV

STEP: Step

This effect creates an auto-arpeggio sound by randomly changing the filter action.

STEP DPT= q	SPD=w	q				w	Parameters	Comment	Values
FB= e	WAV=r	MIN	3	4	MIN	MAX
			MAX 1	2			q DPT (Depth)	Sets the range of the filter action change.	0 – 50
PAGE 1		e				r
		MIN	MAX		MIN	MAX	w SPD (Speed)	Sets the speed of the effect.	1 – 100
UTILITY
PAGE							e FB (Feedback)	Sets the effect sound feedback amount.	0 – 10
PAGE 2							r WAV (Wave Type)	The modulation curve (waveform) can be selected	1 – 3
								from three types.
STEP		MIN	MAX 1	2	MIN	MAX
		t	3	4		y	t RTM (RTM Destination)	Sets the parameter to be controlled by RTM.	SPD, FB
RTM= t	DIR=y
		MIN	MAX		MIN	MAX	y DIR (RTM Direction)	Sets the RTM direction.	NML, INV

PAN: Tremolo/Pan

This effect can be used as tremolo effect or as an automatic stereo panpot.

							Parameters	Comment	Values
PAN DPT= q	SPD=w						q DPT (Depth)	Sets the depth of the tremolo/auto-pan effect.	0 – 50
		q				w	w SPD (Speed)	Sets the speed of the tremolo/auto-pan effect.	1 – 100
CLP= e	WAV=r	MIN	MAX 1	2	MIN	MAX
			3	4			e CLP (Clip)	Increasing this value causes the tremolo waveform
PAGE 1		e				r
		MIN	MAX		MIN	MAX		to be flattened, for an even more pronounced	0 – 10
UTILITY								tremolo/auto-pan effect.
PAGE
							r WAV (Wave Type)	The modulation waveform can be selected from	TRI, SIN,
PAGE 2						t		fore types. "TRI" is a triangular wave and "SIN"
PAN	SEL=t	MIN	MAX 1	2	MIN	MAX		a sine wave.	up, dwn
		y	3	4		u t SEL (Type Select)		"TRM" selects the tremolo effect and "PAN" the
RTMΠy	DIR=u								TRM, PAN
		MIN	MAX		MIN	MAX		auto- pan effect.
							y RTM (RTM Destination)	Shows which RTM parameter is being controlled.	SPD
							u DIR (RTM Direction)	Sets the RTM direction.	NML, INV

Parameters and Types Effect

59■