3' If "PATCH" was selected, use

Data entry knob

3 to set the desired patch number in the "PAT=" item.4 Press the

STORE/EXECUTE key two

times.

5 Press the

USER FUNCTION switch while

playing the instrument in Play mode.

The Utility mode settings are stored and the unit returns to the Play mode.

The preset bank number or patch number will be called up.

USER FUNCTION= PATCH

3PAT=U09

01 8080LEAD LVL=100 AMP ÁVOL ªOFF §HLD

Operation Advanced

✎ If Utility mode settings are not stored, they will remain active only until the unit is next turned off. When turned on again, NOthe unit reverts to the previous settings. If you wish to keep changes you have made, do not forget to press the

STORE/EXECUTE key twice to perform the store process. Note that any edited patch will also be stored at this time.

39■