Zoom 8080 Foot switch settings: pages 7, Switching PRESET groups A/B/C: page, SW1=q, SW3=e, SW5=t, SW2= w, SW4= r, FOLDER = A, Fsw ASSIGN:, Fsw ASSIGN:

Foot switch settings: pages 7, 8

When the 8080 is in Manual mode or Edit mode, foot switches 1-5 can be used to switch effect modules on and off. Pages 7 and 8 of the Utility mode serve to assign modules to the various switches.

Parameters Comment Values

PAGE 7								q SW1 (Switch 1)
Fsw ASSIGN:		SW1=q					q
7	SW2= w	SW3=e	MIN	MAX 1	2	MIN	MAX
				3	4			w SW1 (Switch 2)
			w				e
			MIN	MAX		MIN	MAX
	UTILITY							e SW1 (Switch 3)
	PAGE
PAGE 8								r SW1 (Switch 4)
Fsw ASSIGN:								t SW1 (Switch 5)
8	SW4= r	SW5=t	MIN	MAX 1	2	MIN	MAX
				3	4
			r				t
			MIN	MAX		MIN	MAX

Sets the effect module to be controlled	CMP, EF1, DST, EQ
by foot switch 1.	EF2, EF3, DLY, REV
Sets the effect module to be controlled	CMP, EF1, DST, EQ
by foot switch 2.	EF2, EF3, DLY, REV
Sets the effect module to be controlled	CMP, EF1, DST, EQ
by foot switch 3.	EF2, EF3, DLY, REV
Sets the effect module to be controlled	CMP, EF1, DST, EQ
by foot switch 4.	EF2, EF3, DLY, REV
Sets the effect module to be controlled	CMP, EF1, DST, EQ
by foot switch 5.	EF2, EF3, DLY, REV

✎ It is not possible to assign the same effect module to several foot switches. If this is attempted, the foot switch with the lowest number only is NOactive. For example, if the DST module was already assigned to SW1 and then SW3 is also set to "DST", the indication changes to lower case

("SW3=dst") and the setting will not be active until the setting of SW1 is changed.

Switching PRESET groups A/B/C: page 9

The patches of the 8080 are divided into the USER group and the PRESET groups A, B and C. Only two groups can be active at any one time: the USER group and one PRESET group. Page 9 of the Utility mode serves to select the PRESET group A/B/C (called Folder A/B/C here).

PAGE 9 Parameters Comment

PRESET FOLDER SELECT							q FOLDER	Selects the PRESET group (A, B, C) to be used in Play mode.
9	FOLDER = A	MIN	MAX 1	2	MIN	MAX
			3	4
	q MIN					q
			MAX		MIN	MAX
✎NOIt is also possible to use the USER FUNCTION switch to select PRESET groups A/B/C during a performance (									p. 40).

Operation Advanced

35■