Chapter 15 Link Aggregation

Table 32 Advanced Application > Link Aggregation Status (continued)

LABEL

DESCRIPTION

Aggregator ID

Link Aggregator ID consists of the following: system priority, MAC address, key, port

 

priority and port number. Refer to Section 15.2.1 on page 116 for more information on

 

this field.

 

 

Status

This field displays how these ports were added to the trunk group. It displays:

Static - if the ports are configured as static members of a trunk group.

LACP - if the ports are configured to join a trunk group via LACP.

15.4Link Aggregation Setting

Click Advanced Application > Link Aggregation > Link Aggregation Setting to display the screen shown next. See Section 15.1 on page 115 for more information on link aggregation.

Figure 53 Advanced Application > Link Aggregation > Link Aggregation Setting

The following table describes the labels in this screen.

Table 33 Advanced Application > Link Aggregation > Link Aggregation Setting

LABEL

DESCRIPTION

Link

This is the only screen you need to configure to enable static link aggregation.

Aggregation

 

Setting

 

 

 

Group ID

The field identifies the link aggregation group, that is, one logical link containing

 

multiple ports.

 

 

Active

Select this option to activate a trunk group.

 

 

 

117

ES-2024 Series User’s Guide