Chapter 6 System Status and Port Statistics
Table 7 Status > Port Details (continued)
LABEL | DESCRIPTION |
PD | This field is available for the PWR model only. |
MaxPower | This field displays the maximum amount of power consumed by devices (powered |
| devices, or PD) that use Power over Ethernet (PoE) to get power from the Switch on |
| this port. |
|
|
LACP | This field shows if LACP is enabled on this port or not. |
|
|
TxPkts | This field shows the number of transmitted frames on this port |
|
|
RxPkts | This field shows the number of received frames on this port |
|
|
Errors | This field shows the number of received errors on this port. |
|
|
Tx KB/s | This field shows the number kilobytes per second transmitted on this port. |
|
|
Rx KB/s | This field shows the number of kilobytes per second received on this port. |
|
|
Up Time | This field shows the total amount of time the connection has been up. |
|
|
Tx Packet
The following fields display detailed information about packets transmitted.
TX Packets | This field shows the number of good packets (unicast, multicast and broadcast) |
| transmitted. |
|
|
Multicast | This field shows the number of good multicast packets transmitted. |
|
|
Broadcast | This field shows the number of good broadcast packets transmitted. |
|
|
Pause | This field shows the number of 802.3x Pause packets transmitted. |
|
|
Rx Packet
The following fields display detailed information about packets received.
RX Packets | This field shows the number of good packets (unicast, multicast and broadcast) |
| received. |
|
|
Multicast | This field shows the number of good multicast packets received. |
|
|
Broadcast | This field shows the number of good broadcast packets received. |
|
|
Pause | This field shows the number of 802.3x Pause packets received. |
|
|
TX Collision
The following fields display information on collisions while transmitting.
Single | This is a count of successfully transmitted packets for which transmission is inhibited |
| by exactly one collision. |
|
|
Multiple | This is a count of successfully transmitted packets for which transmission was |
| inhibited by more than one collision. |
|
|
Excessive | This is a count of packets for which transmission failed due to excessive collisions. |
| Excessive collision is defined as the number of maximum collisions before the |
| retransmission count is reset. |
|
|
Late | This is the number of times a late collision is detected, that is, after 512 bits of the |
| packets have already been transmitted. |
|
|
Error Packet | The following fields display detailed information about packets received that were in |
| error. |
|
|
RX CRC | This field shows the number of packets received with CRC (Cyclic Redundant Check) |
| error(s). |
|
|
Runt | This field shows the number of packets received that were too short (shorter than 64 |
| octets), including the ones with CRC errors. |
|
|
Distribution |
|
|
|
62 |
| |
| ||
|
|
|