Chapter 19 Multicast
"Your Switch automatically creates a static VLAN (with the same VID) when you create a multicast VLAN in this screen.
Figure 69 Advanced Application > Multicast > Multicast Setting > MVR
The following table describes the related labels in this screen.
Table 44 Advanced Application > Multicast > Multicast Setting > MVR
LABEL | DESCRIPTION |
Active | Select this check box to enable MVR to allow one single multicast VLAN to be |
| shared among different subscriber VLANs on the network. |
|
|
Name | Enter a descriptive name (up to 32 English keyboard characters) for identification |
| purposes. |
|
|
Multicast VLAN | Enter the VLAN ID (1 to 4094) of the multicast VLAN. |
ID |
|
|
|
802.1p Priority | Select a priority level |
| IGMP control packets (belonging to this multicast VLAN). |
|
|
Mode | Specify the MVR mode on the Switch. Choices are Dynamic and Compatible. |
| Select Dynamic to send IGMP reports to all MVR source ports in the multicast |
| VLAN. |
| Select Compatible to set the Switch not to send IGMP reports. |
|
|
Port | This field displays the port number on the Switch. |
|
|
| 139 |
|
|