Chapter 3 Hardware Overview
Figure 12 Opening the Transceiver’s Latch Example
2Pull the transceiver out of the slot.
Figure 13 Transceiver Removal Example
3.2 Rear Panel
The following figure shows the rear panel of the Switch. The power receptacle is on the read panel.
Figure 14 Rear Panel
3.2.1 Power Connector
Make sure you are using the correct power source as shown on the panel.
To connect the power to the Switch, insert the female end of power cord to the power receptacle on the rear panel. Connect the other end of the supplied power cord to the power source.
3.3 LEDs
The LEDs are located on the front panel. The following table describes the LEDs on the front panel.
Table 2 LEDs
LED | COLOR | STATUS | DESCRIPTION |
PWR | Green | On | The system is turned on. |
|
|
|
|
|
| Off | The system is off. |
|
|
|
|
40 |
| |
| ||
|
|
|