Chapter 19 Multicast

The Switch forwards multicast traffic destined for multicast groups (that it has learned from IGMP snooping or that you have manually configured) to ports that are members of that group. IGMP snooping generates no additional network traffic, allowing you to significantly reduce multicast traffic passing through your Switch.

19.1.4 IGMP Snooping and VLANs

The Switch can perform IGMP snooping on up to 16 VLANs. You can configure the Switch to automatically learn multicast group membership of any VLANs. The Switch then performs IGMP snooping on the first 16 VLANs that send IGMP packets. This is referred to as auto mode. Alternatively, you can specify the VLANs that IGMP snooping should be performed on. This is referred to as fixed mode. In fixed mode the Switch does not learn multicast group membership of any VLANs other than those explicitly added as an IGMP snooping VLAN.

19.2 Multicast Status

Click Advanced Applications > Multicast to display the screen as shown. This screen shows the multicast group information. See Section 19.1 on page 131 for more information on multicasting.

Figure 63 Advanced Application > Multicast

The following table describes the labels in this screen.

Table 40 Multicast Status

LABEL

DESCRIPTION

Index

This is the index number of the entry.

 

 

VID

This field displays the multicast VLAN ID.

 

 

Port

This field displays the port number that belongs to the multicast group.

 

 

Multicast Group

This field displays IP multicast group addresses.

 

 

19.3 Multicast Setting

Click Advanced Applications > Multicast > Multicast Setting link to display the screen as shown. See Section 19.1 on page 131 for more information on multicasting.

132

 

ES-2024 Series User’s Guide