Chapter 11 Spanning Tree Protocol

Figure 40 STP/RSTP Network Example

A

VLAN 1

 

VLAN 2

 

 

 

B

With MSTP, VLANs 1 and 2 are mapped to different spanning trees in the network. Thus traffic from the two VLANs travel on different paths. The following figure shows the network example using MSTP.

Figure 41 MSTP Network Example

A

VLAN 1

 

VLAN 2

 

 

 

B

11.1.4.2 MST Region

An MST region is a logical grouping of multiple network devices that appears as a single device to the rest of the network. Each MSTP-enabled device can only belong to one MST region. When BPDUs enter an MST region, external path cost (of paths outside this region) is increased by one. Internal path cost (of paths within this region) is increased by one when BPDUs traverse the region.

Devices that belong to the same MST region are configured to have the same MSTP configuration identification settings. These include the following parameters:

Name of the MST region

Revision level as the unique number for the MST region

VLAN-to-MST Instance mapping

98

 

ES-2024 Series User’s Guide