Chapter 24 Differentiated Services

Figure 97 IP Application > DiffServ

The following table describes the labels in this screen.

Table 64 IP Application > DiffServ

LABEL

DESCRIPTION

Active

Select this option to enable DiffServ on the Switch.

 

 

Port

This field displays the index number of a port on the Switch.

 

 

*

Settings in this row apply to all ports.

 

Use this row only if you want to make some settings the same for all ports. Use this

 

row first to set the common settings and then make adjustments on a port-by-port

 

basis.

 

Note: Changes in this row are copied to all the ports as soon as you

 

make them.

 

 

Active

Select Active to enable DiffServ on the port.

 

 

Apply

Click Apply to save your changes to the Switch’s run-time memory. The Switch loses

 

these changes if it is turned off or loses power, so use the Save link on the top

 

navigation panel to save your changes to the non-volatile memory when you are done

 

configuring.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

24.3 DSCP-to-IEEE 802.1p Priority Settings

You can configure the DSCP to IEEE 802.1p mapping to allow the Switch to prioritize all traffic based on the incoming DSCP value according to the DiffServ to IEEE 802.1p mapping table.

 

181

ES-2024 Series User’s Guide