Chapter 21 IP Source Guard
Table 61 ARP Inspection VLAN Configure (continued)
LABEL | DESCRIPTION |
Log | Specify when the Switch generates log messages for receiving ARP |
| packets from the VLAN. |
| None: The Switch does not generate any log messages when it receives |
| an ARP packet from the VLAN. |
| Deny: The Switch generates log messages when it discards an ARP |
| packet from the VLAN. |
| Permit: The Switch generates log messages when it forwards an ARP |
| packet from the VLAN. |
| All: The Switch generates log messages every time it receives an ARP |
| packet from the VLAN. |
|
|
Apply | Click Apply to save your changes to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the |
| Save link on the top navigation panel to save your changes to the non- |
| volatile memory when you are done configuring. |
|
|
Cancel | Click this to reset the values in this screen to their |
|
|
168 |
| |
| ||
|
|
|