Chapter 6 System Status and Port Statistics
Figure 24 Status: Port Details
The following table describes the labels in this screen.
Table 7 Status > Port Details
LABEL | DESCRIPTION | |
Port Info |
| |
|
| |
Port NO. | This field displays the port number you are viewing. | |
|
| |
Name | This field displays the name of the port. | |
|
| |
Link | This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M for | |
| 1000Mbps) and the duplex (F for full duplex or H for half duplex). It also shows the | |
| cable type (Copper or Fiber). | |
|
| |
Status | If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port | |
| (see Section 11.1.3 on page 97 for more information). | |
| If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it | |
| displays STOP. | |
|
| |
PD | This field is available for the PWR model only. | |
PowerCon | This field displays the current amount of power consumed by devices (powered | |
sumption | devices, or PD) that use Power over Ethernet (PoE) to get power from the Switch on | |
| this port. | |
|
| |
PD | This field is available for the PWR model only. | |
MaxCurre | This field displays the maximum amount of current drawn by devices (powered | |
nt | ||
devices, or PD) that use Power over Ethernet (PoE) to get power from the Switch on | ||
| this port. | |
|
|
| 61 |
|
|