Chapter 4 The Web Configurator
Table 5 Navigation Panel Links (continued)
LINK | DESCRIPTION |
Static Route | This link takes you to screens where you can configure static routes. A static route |
| defines how the Switch should forward traffic by configuring the TCP/IP parameters |
| manually. |
|
|
DiffServ | This link takes you to screens where you can enable DiffServ and set |
| IEEE802.1p mappings. |
|
|
DHCP | This link takes you to a screen where you can configure the DHCP settings. |
|
|
Management |
|
|
|
Maintenance | This link takes you to screens where you can perform firmware and configuration |
| file maintenance as well as reboot the system. |
|
|
Access Control | This link takes you to screens where you can change the system login password |
| and configure SNMP and remote management. |
|
|
Diagnostic | This link takes you to screens where you can view system logs and test port(s). |
|
|
Syslog | This link takes you to screens where you can setup system logs and a system log |
| server. |
|
|
Cluster | This link takes you to a screen where you can configure clustering management |
Management | and view its status. |
|
|
MAC Table | This link takes you to a screen where you can view the MAC addresses (and types) |
| of devices attached to what ports and VLAN IDs. |
|
|
ARP Table | This link takes you to a screen where you can view the MAC addresses – IP |
| address resolution table. |
|
|
Configure Clone | This link takes you to a screen where you can copy attributes of one port to other |
| ports. |
|
|
After you log in for the first time, it is recommended you change the default administrator password. Click Management > Access Control > Logins to display the next screen.
Figure 17 Change Administrator Login Password
50 |
| |
| ||
|
|
|