Chapter 16 Remote Management Screens
To change your NWA’s FTP settings, click REMOTE MGMT > FTP. The following screen displays.
Figure 114 Remote Management: FTP
The following table describes the labels in this screen.
Table 55 Remote Management: FTP
LABEL | DESCRIPTION |
Server Port | This is set to port 21 by default. |
| You may change the server port number for a service if needed, |
| however you must use the same port number in order to use that |
| service for remote management. |
|
|
Server Access | Select the interface(s) through which a computer may access the NWA |
| using this service. |
|
|
Secured Client | A secured client is a “trusted” computer that is allowed to communicate |
IP Address | with the NWA using this service. |
| Select All to allow any computer to access the NWA using this service. |
| Choose Selected to just allow the computer with the IP address that |
| you specify to access the NWA using this service. |
|
|
Apply | Click Apply to save your customized settings and exit this screen. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
16.4 The WWW Screen
You can choose to configure your NWA via the World Wide Web (WWW) using a Web browser. This lets you specify which IP addresses or computers are able to communicate with and access the NWA.
200 |
| |
| ||
|
|
|