Chapter 16 Remote Management Screens
16.5 The SNMP Screen
Use this screen to have a manager station administrate your NWA over the network. To change your NWA’s SNMP settings, click REMOTE MGMT > SNMP. The following screen displays.
Figure 116 Remote Management: SNMP
The following table describes the labels in this screen.
Table 57 Remote Management: SNMP
LABEL | DESCRIPTION |
SNMP Configuration | |
|
|
Get Community | Enter the Get Community, which is the password for the incoming |
| Get and GetNext requests from the management station. The default |
| is public and allows all requests. |
|
|
Set Community | Enter the Set community, which is the password for incoming Set |
| requests from the management station. The default is public and |
| allows all requests. |
|
|
Community | Type the trap community, which is the password sent with each trap |
| to the SNMP manager. The default is public and allows all requests. |
|
|
Trap Destination | Type the IP address of the station to which you want the NWA to send |
| SNMP traps. |
|
|
| 203 |
|
|