Chapter 20 VLAN
2Click VLAN > Wireless VLAN.
3If VLAN is not already enabled, click Enable Virtual LAN and set up the Management VLAN ID (see Section 20.3.2 on page 250).
Note: If no devices are in the management VLAN, then no one will be able to access the NWA and you will have to restore the default configuration file.
4Select the SSID profile you want to configure (SSID03 in this example), and enter the VLAN ID number (between 1 and 4094).
5Enter a Second Rx VLAN ID. The following screen shows SSID03 tagged with a VLAN ID of 3 and a Second Rx VLAN ID of 4.
Figure 159 Configuring SSID: Second Rx VLAN ID Example
6Click Apply to save these settings. Outgoing packets from clients in SSID03 are tagged with a VLAN ID of 3, and incoming packets with a VLAN ID of 3 or 4 are forwarded to SSID03.
264 |
| |
| ||
|
|
|